Xiamen Juda Chemical & Equipment Co., Ltd. is one of the leading manufacturers and suppliers of Clean Fire Extinguishing Agents: FK5112 Compared With FM200 and Novec 1230 in China. If you are looking for Clean Fire Extinguishing Agents: FK5112 Compared With FM200 and Novec 1230, please be free to buy our quality products at competitive price from our factory. Contact us for quotation.

What Is FK5112? Tel:+86-592-5803997

FK5112 is a fluoroketone clean agent, chemically named perfluoro(2-methyl-3-pentanone), with CAS number 756-13-8 and molecular formula C₆F₁₂O. At room temperature and normal pressure, it appears as a colourless, transparent low-boiling liquid with a boiling point of roughly 49.2°C. This physical trait is what makes it unique among clean fire extinguishing agents: it is stored as liquid inside pressurised fire cylinders, but vaporises rapidly once released into the protected enclosure, turning into an electrically non-conductive vapour for fire suppression.

With a molecular weight of 316.04, FK5112 features zero ozone depletion potential (ODP) and an ultra-low global warming potential (GWP=1). Its atmospheric lifetime is only a few days, so it imposes minimal long-term burden on the climate. The agent suppresses fires mainly by absorbing massive heat from the combustion zone; it also interrupts flame chemical chain reactions at high temperature. Unlike inert gas systems, it does not rely heavily on oxygen displacement, allowing safe deployment in occupied rooms under properly engineered NFPA 2001 design limits. Once ventilation restores normal air circulation after discharge, FK5112 vapour dissipates completely without powder, oily film or corrosive residue left on electronics, circuit boards or precision equipment.

Core Performance Differences: FK 5 1 12 vs FM200 Tel:+86-592-5803997

FM200 has been the dominant clean agent for decades, widely adopted for server rooms, electrical control panels and small enclosed hazards. It extinguishes fires mainly through heat absorption and chemical inhibition, and it works at moderate design concentrations. However, FM200 has notable drawbacks that push many project teams to evaluate alternatives.

When comparing FK 5 1 12 vs FM200, the most obvious gap lies in environmental footprint. FM200 has a relatively high GWP and longer atmospheric lifetime, which makes it subject to tighter F-gas regulations in many regions. As governments roll down quotas for hydrofluorocarbons, recharging existing FM200 systems becomes more expensive and supply less predictable.

FK5112, by contrast, is a fluoroketone clean agent with near-term environmental stability. It requires lower agent mass to achieve fire suppression for the same hazard volume. This reduces cylinder count, cuts system footprint and lowers shipping and storage expenses. Another practical difference is discharge by-products. FM200 can generate more hydrofluoric acid at high flame temperatures, while FK5112 produces fewer corrosive decomposition products when exposed to fire, bringing better protection for delicate electronics and coated components.

FK 5 1 12 vs fm200

FK 5 1 12 vs Novec 1230: Chemistry and Sourcing Tel:+86-592-5803997

A common confusion among buyers is the relationship between FK 5 1 12 and Novec 1230. Chemically, both refer to the same active molecule: perfluoro-2-methyl-3-pentanone. The distinction comes from branding and supply channels. Novec 1230 is the well-known branded formulation, while FK 5 1 12 is the generic technical name of this clean fire extinguishing agent.

When running a side-by-side FK 5 1 12 vs Novec 1230 comparison for engineering calculations, fire suppression performance, toxicity limits and design concentration values are identical. The real differences show up in lead times, bulk pricing and global supply resilience. For large or repeated retrofit projects, many system integrators prefer to source high-purity FK5112 directly from chemical manufacturers rather than branded distributors, to avoid extended lead times and premium markups.

If you would like more information about the differences between Novec 1230 and FK5112. 👉 Visite la página Novec 1230 frente a FK5112

Practical Design Considerations for Clean Agent Selection Tel:+86-592-5803997

Beyond datasheet numbers, engineers must consider site-specific constraints when picking a clean agent. Room volume, enclosure tightness, occupied space classification, asset sensitivity and local environmental legislation all influence the final choice.

FM200 may still be acceptable for smaller legacy retrofits where the client prioritises familiar system hardware and existing technician knowledge. But for new-build facilities, especially data centres, battery storage rooms and semiconductor workshops, FK 5 1 12 often becomes the preferred option. Its low GWP profile future-proofs installations against upcoming F-gas restrictions, while the lower required agent mass reduces cylinder space, which is valuable where floor or rack space is limited.

For occupied areas, both FK 5 1 12 and FM200 follow NFPA 2001 safety limits, but FK 5 1 12's lower design concentration gives extra flexibility in space planning. Operators also appreciate its residue-free characteristic; once the event is over and ventilation completes, equipment can be inspected and restored without extensive cleaning work.

Typical Projects Where FK 5 1 12 Is Preferred Tel:+86-592-5803997

This clean agent fits well for new construction and upgrade projects where sustainability and supply continuity are key priorities. That includes AI server rooms, battery energy storage cabinets, precision analytical labs, electrical substations and museum collections. It works for total flooding systems as well as localised cabinet suppression, giving designers flexibility across different hazard geometries.

Many fire protection contractors now keep FK 5 1 12 in their material shortlist when bidding large international projects, to avoid risks tied to HFC phase-down and supply bottlenecks affecting older clean fire extinguishing agents.

Physical and chemical Properties of FK-5-1-12: Tel:+86-592-5803997

Information on basic physical and chemical properties at 25 °C

Appearance	Liquid
Autoignition temperature	Not applicable
Boiling point / boiling range	49.2 °C
Color	Colorless
Critical temperature	168.7 °C
Critical density	639.1 kg/m³
Critical pressure	18.65 bar
Critical volume	494.5 cc/mole
Density, saturated liquid	1.6 g/ml
Density, gas at 1 atm	0.0136 g/ml
Dielectric strength, relative to N2
Decomposition temperature	Not applicable
Dynamic viscosity	Not applicable
Evaporation rate	Not applicable
Explosive properties	Not an explosive
Freezing point	-108.0 °C
Flammability (solid, gas)	Not flammable
Flammability limit in air	Not applicable
Flash point	Not applicable
Heat of vaporization at boiling point	88.0 kJ/kg
Kinematic viscosity	Not applicable
Specific volume, gas at 1 atm	0.0733 m3/kg
Specific heat, liquid	1.103 kJ/kg°C

Obtain the FK5112 Safety Data Sheet (MSDS).

fk-5-1-12 supplier - company profile Tel:+86-592-5803997

When evaluating FK 5 1 12 vs FM200 and FK 5 1 12 vs Novec 1230, there is no universal one-size-fits-all answer. FM200 offers long field history but faces tightening environmental controls. Novec 1230 uses the same active chemistry as FK 5 1 12, with the main variation in brand pricing and supply chains.

For teams aiming to build compliant, space-efficient and future-ready fire suppression systems, FK 5 1 12 stands out as a robust clean agent option. If you need technical data sheets, purity specifications or bulk supply quotations for your upcoming fire protection project, get in touch with our team.

As a professional supplier and manufacturer of the clean agent FK-5-1-12, we offer:

Bulk supply of FK-5-1-12 and project pricing

OEM/Private Label Service

MSDS, COA, TDS, certificates of compliance

Stable production capacity and long-term supply contracts

How to Cooperate with Us?

Our Management Team

Room 1102, Unit C, Xinjing Center, No.25 Jiahe Road, Siming District, Xiamen, Fujan, China

Phone number

+86-592-5803997

susan@xmjuda.com