PFPE Fluids and Fluorinated Coolants
PFPE Fluids and Fluorinated Coolants
Perfluoropolyether (PFPE) is a chemical-fluid family, not a single grade. Xiamen Juda Chemical lists PFPE products for heat transfer and liquid cooling, lubrication, vacuum-pump service, and vapour-phase reflow applications, together with other fluorinated coolant products.
How to select a PFPE fluid
Select the exact grade by the intended function and verified operating conditions. Compare only product-specific data measured under stated test methods; a shared PFPE family name does not mean that two grades have the same viscosity, volatility, vapour pressure, thermal range, dielectric behaviour or material compatibility.
| PFPE application | What to verify |
|---|---|
| Heat-transfer and liquid-cooling fluids | Exact grade, operating-temperature window, boiling or pour point where relevant, density, vapour pressure, dielectric data, cooling architecture, material compatibility and test method. |
| PFPE lubricants and base oils | Exact grade, viscosity-temperature data, volatility, load and speed conditions, materials in contact, grease formulation requirements and test method. |
| PFPE vacuum-pump oils | Exact grade, viscosity, vapour-pressure data, target vacuum service, pump and seal compatibility, operating conditions and change procedure. |
| Vapour-phase reflow fluids | Exact grade, working-temperature window, vapour-pressure data, reflow process conditions, equipment compatibility and residue-control requirements. |
Documents to request before technical approval or purchase
- Current product-specific Technical Data Sheet (TDS) with units, conditions and test methods.
- Current Safety Data Sheet (SDS) for the destination market.
- Available Certificate of Analysis (COA), grade identification and batch-related data.
- Application guidance, material-compatibility information, packaging, storage and transport requirements.
This category page is a navigation aid. Final grade selection should use current product-specific documents, equipment conditions, compatibility testing and applicable local requirements.
-
![Data Center Liquid Cooling Perfluoropolyether PFPE JX-1]()
Data Center Liquid Cooling Perfluoropolyether PFPE JX-1Read MoreJX series PFPE products (perfluoropolyethers) are perfluoropolyether immersion cooling fluids. They are synthetic, single-phase immersion cooling fluids.
-
![PFPE Vacuum Pump Oils: Ultimate Protection for Critical Vacuum Systems]()
PFPE Vacuum Pump Oils: Ultimate Protection for Critical V...Read MoreMain Advantages:High thermal efficiency. Low-temperature heat dissipation. High heat capacity. Stable performance. Not compatible with mineral oil or alkylbenzene oil..
-
![Direct To Chip Cooling Coolant PFPE JHT Series]()
Direct To Chip Cooling Coolant PFPE JHT SeriesRead MoreThe JHT series direct-to-chip coolant is widely used in various cooling and temperature control systems—particularly across different stages of semiconductor production—as well as in data center
-
![Liquid Immersion Cooling Coolant]()
Liquid Immersion Cooling CoolantRead MoreAs computational demands intensify, the infrastructure that supports it must evolve. Liquid immersion cooling is that evolution, and our Perfluoropolyether Oil JX is the definitive coolant for single
-
![JX Series Immersion Coolant For GPU Immersion Cooling]()
JX Series Immersion Coolant For GPU Immersion CoolingRead MoreHigh Performance Dielectric Heat Transfer Fluids. Excellent Thermal And Chemical Stability. Good Compatibility With Materials. Good Heat Transfer Performance. Low Evaporation Loss. No Flash Or Fire
-
![HFE 7200 Immersion Cooling For Data Centers]()
HFE 7200 Immersion Cooling For Data CentersRead MoreHFE 7200 is a hydrofluoroether (HFE)-based engineered fluid. It is a colorless, non-flammable, non-corrosive liquid with exceptional dielectric properties and a low global warming potential (GWP).
-
![Data Center Immersion Cooling HFE 7100 Solvent]()
Data Center Immersion Cooling HFE 7100 SolventRead MoreFor a Data Center Immersion Cooling HFE 7100 Solvent inquiry, provide the required product designation, grade or model, intended application and operating conditions, quantity, packaging, destination
-
![Dielectric Coolant PFPE Liquid JX Series]()
Dielectric Coolant PFPE Liquid JX SeriesRead MoreFor a Dielectric Coolant PFPE Liquid JX Series inquiry, provide the required product designation, grade or model, intended application and operating conditions, quantity, packaging, destination
-
![Single Phase Immersion Cooling Fluid JX Series]()
Single Phase Immersion Cooling Fluid JX SeriesRead MorePFPE Oil JX series is non-flammable, non-toxic, and chemically inert, making it safe for long-term use with sensitive electronic components.
-
![Immersion Cooling Oil PFPE JX Series]()
Immersion Cooling Oil PFPE JX SeriesRead MoreFor a Immersion Cooling Oil PFPE JX Series inquiry, provide the required product designation, grade or model, intended application and operating conditions, quantity, packaging, destination market
-
![Perfluoropolyether Oil JHLO 06/6]()
Perfluoropolyether Oil JHLO 06/6Read MoreFor a Perfluoropolyether Oil JHLO 06/6 inquiry, provide the required product designation, grade or model, intended application and operating conditions, quantity, packaging, destination market and
-
![PFPE Lubricant JHLO 06/6]()
PFPE Lubricant JHLO 06/6Read MoreFor a PFPE Lubricant JHLO 06/6 inquiry, provide the required product designation, grade or model, intended application and operating conditions, quantity, packaging, destination market and required
With wide experience and expertise, Xiamen Juda Chemical & Equipment Co., Ltd. is one of the leading immersion fluorinated coolant suppliers and manufacturers in China. All of our immersion fluorinated coolant products have the integrated certificates of ISO quality, safety and environment. Welcome to buy our quality products at competitive price from our factory. For quotation, contact us now.