Xiamen Juda Chemical & Equipment Co., Ltd. is one of the leading manufacturers and suppliers of map pro gas torch jh-6st with ce certification in China. If you are looking for map pro gas torch jh-6st with ce certification, please be free to buy our quality products at competitive price from our factory. Contact us for quotation.

Map Pro Gas Torch JH-6ST With CE Certification

Map Pro Gas Torch JH-6ST is an oxygen-free hand torch, which can weld without additional oxygen during the welding process.

Working principle
Fuel combustion: Oxygen-free welding torches usually use special fuel gases, such as MAPP gas, propane, etc. These gases are mixed with air in the welding torch, and a combustion reaction occurs after being ignited by an ignition device. The combustion generates high temperatures, which melt the welding materials (such as brazing materials), thereby achieving welding.

Main features of JH-6ST

●Brass tip end for luxury outlook and fast tip cooling
●Specially designed valve to adust pressure precisely
●Torch Ignited Instantly
●Redesigned handle for comportable use

Key advantages of mapp gas torch jH-6ST

Good safety performance: Since map gas blow torch JH-6ST do not need to use high-pressure oxygen cylinders, the safety risks caused by oxygen leakage and oxygen cylinder explosion are reduced. At the same time, in some special environments, such as flammable and explosive places, oxygen-free welding torches are relatively safer because they do not provide additional combustion-supporting oxygen like oxygen welding torches, reducing the hidden dangers of fire and explosion.

how to use map gas blow torch

Preparation

Check the equipment: Before use, carefully check whether the parts of the mapp gas blowtorch are firmly connected and whether there is any leakage. Check whether the gas in the gas tank is sufficient and whether the pressure reducing valve is working properly.

Wear protective equipment: Wear protective glasses, gloves and other protective equipment to prevent sparks and high temperatures generated during welding from causing harm to the body.

Clean the welding area: Use sandpaper or wire brushes to clean the oil, rust, oxides and other impurities on the welding area to ensure that the welding surface is clean and flat to ensure the welding quality.

Installation and Adjustment

Connect the gas: Connect the gas tank to the pressure reducing valve through a dedicated pipe, and then firmly connect the outlet of the pressure reducing valve to the air inlet of the oxygen-free welding gun.

Adjust the gas flow: Open the gas tank valve, and then slowly adjust the adjustment knob on the pressure reducing valve to make the gas output pressure reach a suitable value. Generally speaking, the pressure can be adjusted between 0.05-0.1MPa according to the welding materials and welding requirements. At the same time, preliminarily adjust the gas flow through the gas flow adjustment knob on the welding gun to make the flame size moderate.

easy to use