New Type Replacing R22 Refrigerant Gas R32

New Type Replacing R22 Refrigerant Gas R32

 

R32 is a hydrofluorocarbon (HFC) refrigerant that is replacing conventional refrigerants such as R22 and R410A. Thereason for its increasing use in refrigeration and HVAc systems is its high heat transfer efficiency and minimal impacton the environment. While air conditioners are used to supply cold ar to an indoor space, the unit still generates heatinternally to perform its cooling functions.

 

In conclusion, the most relevant advantages of R32 refrigerant are:

High efficiency. In terms of performance, R32 does not have many differences compared to the refrigerant it is replacing, R410A. However, HFC32 is significantly more efficient, To give an idea, a nominal 2-row 36 x 70-inch condenser using R32 would require 40% less refrigerant than the same component using R410A to perform identical functions.

Lower cost. R32 is a single gas, not a combination of two varieties. For this reason, it costs up to 30% less per kilogramthan conventional refrigerants like R410A.

Energy-efficient. in addition to being more cost-effective, HFc32 also lasts longer, resulting in fewer refills. in fact, itcould require only a quarter of the changes compared to other refrigerants.

Reduces electricity bills, There have been cases where the use of R32 refrigerant has reduced electricity bills by10%.

Environment friendly: R32 has a GWP of 675, which is significantly lower compared to other refrigerants such as R410A with a value of 2,088Not to mention R11, which exhibits the highest figure of 4,750, n comparison, R22 and R134A have values of 1.810 and1,430, respectively.

R32 refirgerant gas has a good thermodynamic performance and is flammable, which makes it safe to use by a qualified professional. R32 should store in a cool, ventilated warehouse. Keep away from fire, heat sources and direct sunlight. The storage temperature should not exceed 30℃.